Cylinder head BN4 from 48863, BN6, BN7, BT7, BJ7 and BJ8
aluminium with polished finish. Comes with Oil filler cap
Required: 1
aluminium with polished finish and 'Austin Healey script. Comes with Oil filler cap
Required: 1
zinc plated
All BN4 and BN6, BN7 and BT7 to 29E-H630
Required: 2
zinc plated
BN7 and BT7 from 29E-H361, all BJ7 and BJ8
Required: 2
chromed
BN7 and BT7 from 29E-H361, all BJ7 and BJ8
Required: 2
stainless steel
BN7 and BT7 from 29E-H361, all BJ7 and BJ8
Required: 2
rocker cover
BN7 and BT7 from 29E-H361, all BJ7 and BJ8
Required: 2
rocker cover attachment
For vehicles with alloy rocker cover
Required: 2
crankcase vent at rocker cover - supplied with nut
Required: 1
on cylinder head
Not suitable for alloy rocker covers
Required: 2
BN4
Required: 2
for dome nut
BN4
Required: 2
zinc plated
Not suitable for alloy rocker covers
Required: 1
with breather, chromed. Diameter: 60 mm
Not suitable for alloy rocker covers
Required: 1
90° angled - crankcase vent and air filter to inlet manifold
Required: 1
Required: 2
in rocker arm
Required: 12
in Kipphebelwelle
Required: 1
in rocker shaft
Required: 1
80° C, original bellow type
Alternatives
Required: 1
86° C, original bellow type
Alternatives
Required: 1
exhaust, hardened
For lead free applications
Required: 6
improved version - may replace OE valve stem seal
May replace OE valve stem seal
Required: 12
inlet valve. Bronze type for lead free applications
Required: 6
exhaust valve. Bronze type for lead free applications
Required: 6
casted and galvanized. The sealing cone is spring loaded
Required: 1
reconditioned. This item is sold on an exchange basis so a core unit surcharge will apply
Required: 1
new item made from alloy. Standard spec. complete with valves, guides and springs
Required: 1
classic copper gasket on metal layer
Required: 1
for water drain tap
Models without heater
Required: 1
BN7 and BT7 from 29D-H28864, all BJ7 and BJ8
Required: 1
otter switch
BN7 and BT7 from 29D-H28864, all BJ7 and BJ8
Required: 1
BN7 and BT7 from 29D-H28864, all BJ7 and BJ8
Required: 3
7/16" - galvanised 3 mm thick washer for cylinder head dome nut
Required: 16
aftermarket product in OE quality
Required: 1
made from high quality composite material. Bore size: ??, Thickness: 0.35", built in thickness: 0.33"
Required: 1
competition MLS construction for high compression engines. Max bore size: 85.7 mm
Required: 1
