Heater and heater controls - MK4 and 1500
heater control. Variant without illumination
To chassis no. FH45740 and FK28000
Necessário: 1
heater control. Variant with illumination
From chassis no. FH50001 and FM1
Necessário: 1
for escutcheon illumination
From chassis no. FH50001 and FM1
Necessário: 1
From chassis no. FH50001 and FM1
Necessário: 1
From chassis no. FH50001 and FM1
Necessário: 1
Necessário: 4
for fresh air control lever and blower switch
Necessário: 1
on fan control lever knob - 'Pull Boost'
Necessário: 1
Necessário: 2
heater
Necessário: 1
fresh air, incl. blower switch
Necessário: 1
thick
Necessário: 3
thin
Necessário: 1
Retaining control lever to dash shelf panel
Necessário: 4
Retaining control lever to dash shelf panel
Necessário: 4
Retaining control lever to dash shelf panel
Necessário: 4
demister nozzle
Necessário: 2
windscreen: Identify by 1.1/2" bore
All MK4, 1500 to mid 1976
Necessário: 2
windscreen, LH side: Identify by 1.3/4" bore
1500 from mid 1976
Necessário: 1
windscreen, RH side: Identify by 1.3/4" bore
1500 from mid 1976
Necessário: 1
Retaining outlet on demister nozzle
Necessário: 4
Retaining outlet on demister nozzle
Necessário: 4
Retaining outlet on demister nozzle
Necessário: 4
with 27" length
All MK4, 1500 to mid 1976
Necessário: 2
heater unit to demister nozzle - bore: 1.3/4"
1500 from mid 1976
Necessário: 2
complete unit - new item
All MK4, 1500 to mid 1976
Necessário: 1
complete unit - exchange
All MK4, 1500 to mid 1976
Necessário: 1
complete unit - new item
1500 from mid 1976
Necessário: 1
- new item
Necessário: 1
heater motor to heater cases
Necessário: 4
metal, rotation: clokwise
Necessário: 1
heater motor - Spitfire 1500 variant
Necessário: 1
to heater valve - length: 130 cm
Necessário: 1
heater control cable through bulkhead
Necessário: 1
Retaining heater unit to dash shelf panel
Necessário: 4
Retaining heater unit to dash shelf panel
Necessário: 4
Retaining heater unit to dash shelf panel
Necessário: 4
Outer cable securing
Necessário: 1
Outer cable securing
Necessário: 1
heater case to bulkhead
Necessário: 1
heater valve - stainless steel
Necessário: 1
Retaining heater valve on bracket
Necessário: 2
Retaining heater valve on bracket
Necessário: 2
Retaining heater valve on bracket
Necessário: 2
foamed plastic - large
Necessário: 2
super coolant
Necessário: 1
Conteúdo: 355 ml (56,65 £ / 1000 ml)
