body panels and fittings
RH front wing, nose section
Necessário: 1
under RH front wing
Necessário: 1
RH front wing, indicator section
Necessário: 1
RH front wheel arch - width: approx. 13 cm
Necessário: 1
RH front wing, rear half only
Necessário: 1
LH front wing, nose section
Necessário: 1
under LH front wing
Necessário: 1
LH front wing, indicator section
Necessário: 1
LH front wheel arch - width: approx. 13 cm
Necessário: 1
LH front wing, rear half only
Necessário: 1
on top of front wing
Necessário: 2
behind RH front wheel
Necessário: 1
behind LH front wheel
Necessário: 1
footwell to RH front wing
Necessário: 1
footwell to LH front wing
Necessário: 1
joining front wings to grille
Necessário: 2
RH - with step assembly
Necessário: 1
RH - repair panel without step
Necessário: 1
LH - with step assembly
Necessário: 1
LH - repair panel without step
Necessário: 1
porta da frente direita
Necessário: 1
LH front door
Necessário: 1
door striker
Per door
Necessário: 6
'D' post, RH side - variant with Dzus fasteners for wheel spat
Necessário: 1
'D' post, LH side - variant with Dzus fasteners for wheel spat
Necessário: 1
for vehicles with wide bumper
Mark II 3.4 and 3.8 (1959-67)
Necessário: 1
for vehicles with wide bumper
Mark II 2.4 (1959-67)
Necessário: 1
for vehicles with narrow bumper
Mark II 240 and 340 (1967-69)
Necessário: 1
Daimler 2.5 V8 berlina para chassis números 1A12497 e 1A20557 (1962-67)
Necessário: 1
Daimler 2.5 V8 "250" Berlina do chassis número 1K1001 e 1K30001 (1967-69)
Necessário: 1
RH rear - 'Coombs' type
Alternatives
Necessário: 1
LH rear - 'Coombs' type
Alternatives
Necessário: 1
rear - 'Coombs' type in fibreglass. Supplied in pairs
Alternatives
Necessário: 1
RH chassis leg with 60 cm length - from front to just behind 'V' block mounting
From front to just behind 'V' block mounting
Necessário: 1
LH chassis leg with 60 cm length - from front to just behind 'V' block mounting
From front to just behind 'V' block mounting
Necessário: 1
LH front
Outrigger
Necessário: 1
R/H floor
Above front jacking point
Necessário: 1
L/H floor
Above front jacking point
Necessário: 1
on screw securing gearbox cover
Necessário: 11
RH front
Necessário: 1
LH front
Necessário: 1
RH rear
Necessário: 1
LH rear
Necessário: 1
panhard rod
For R/H spring hanger
Necessário: 1
rear leaf spring
For L/H spring hanger
Necessário: 1
boot lid
Approx 10" from bottom edge
Necessário: 1
RH rear inner corner with bumper mounting
Necessário: 1
LH rear inner corner with bumper mounting
Necessário: 1
spare wheel well
Necessário: 1
less button, barrel and key
Necessário: 1
boot lock. Comes with button and two keys
long pozi headed
Per top rear hinge (fixing door to hinge)
Necessário: 4
5/8" x 5/16" UNF thread - with cross slotted cheese head and pointed end, galvanised
Per front hinge (fixing hinge to 'A' post). 3 required per rear hinge (fixing hinge to 'C' post).
Necessário: 2
pointed hinge
Per front hinge (fixing door to hinge). 3 required per bottom rear hinge (fixing door to hinge).
Necessário: 3
pointed hinge
Per front hinge (fixing hinge to 'A' post)
Necessário: 1
for door hinge
Per door
Necessário: 2
front-R/H upper and L/H lower
Necessário: 2
front door - RH lower and LH upper - used item
Necessário: 2
rear-R/H lower
Necessário: 1
