Distributor and ignition coil - Series II and III with Lucas 45DE6 distributor less amplifier (from February 1975)
45DE6 top entry type. Reproduction of the Lucas distributor 41617
4.2 models
Required: 1
exchange - serial number: 41914
3.4 models
Required: 1
for Lucas 45D6 and 45DE6 distributor. Characteristic: fixed with clips
Required: 1
with spring - inside Lucas 45D4, 45DE6 and 45DM6 distributor cap
Required: 1
FOR Lucas 44D4, 45D4 and 45DE6 distributor. Identification: cam without peg
4.2 and 3.4 Series II, 3.4 Series III to engine no. 8A12014
Required: 1
- identification: sliding point type
3.4 Series III from engine no. 8A12015
Required: 1
Required: 1
Required: 1
6RA type with 4 Lucar terminals - overdrive, starter motor, ignition, horn, alternator and heater motor
6RA type
Required: 1
6RA type with 4 Lucar terminals - overdrive, starter motor, ignition, horn, alternator and heater motor
Required: 1
for Lucas 22D6, 25D6, 45DE6 and 45DM6 distributors with top entry cap. Identified by push fit ignition leads
Required: 1
for Lucas 22D6, 25D6, 45DE6 and 45DM6 distributors with top entry cap. Identified by push fit ignition leads
Required: 1
for Lucas 22D6, 25D6, 45DE6 and 45DM6 distributors with top entry cap. Identified by push fit ignition leads. HT lead set with 8 mm silicone jacket in black
Required: 1
ignition coil
Required: 1
with push-in HT lead terminal and approx. 1.4 Ohm primary resistance. Ballasted type
Required: 1
ignition coil
Required: 1
Required: 1
for tuned 6 cylinder engines with Lucas distributor and negative earth. Please note: distributor rotation anti clockwise. This ignition system will only work on tuned engines NOT on a standard works engine. For standard engines use 485464 (for cars with negative earth) resp. 487791 (for cars with positive earth)
All XJ6 models with Lucas distributors
Required: 1