Cylinder block Jaguar MKII
for engine stabiliser - attached to the bell housing
Required: 1
gearbox mounting - colour code: black
models with non-overdrive Moss gearbox
Required: 1
gearbox mounting - colour code: blue
All models with overdrive gearbox and automatic transmission
Required: 1
Required: 1
cylinder block RH side - for oil filter flange
Required: 1
cylinder, L/H of block
Required: 1
cylinder head, variant less alignment dowel - length: 6.3/8"
For models with no lifting brackets
Required: 13
cylinder head, variant less alignment dowel - length: 6.3/8"
Only for models with lifting brackets
Required: 10
cylinder head - length: 6.13/16"
Only for models with lifting brackets
Required: 3
cylinder head, with alignment dowel - length: 6.13/16"
Only for models with lifting brackets
Required: 1
cylinder head, with alignment dowel - length: 6.1/2"
Only for models without lifting bracket
Required: 1
rear cover to cylinder block
Early type. Quote engine no.
Required: 3
securing cover
Early type. Quote engine no.
Required: 3
rear
Late type. Qoute engine no.
Required: 1
with bearings - exchange. Identification: screwed plugs in crankshaft journals and crankshaft flange with 10 threads. This crank is sealed by an oil worm
3.4 to engine no. KH2793, 3.8 to engine no. LB8246 (1959-62)
Required: 1
with bearings - exchange. Identification: screwed plugs in crankshaft journals and crankshaft flange with 10 threads. This crank is sealed by an rope seal
3.4 from engine no. KH2794, 3.8 from engine no. LB8247 plus all 340 models (1962-69)
Required: 1
new item without bearings. Identification: screwed plugs in crankshaft journals and crankshaft flange with 10 threads. This crank is converted to rear oil seal
3.4 from engine no. KH2794, 3.8 from engine no. LB8247 plus all 340 models (1962-69)
Required: 1
crankshaft, length: 1.1/8" - manual transmission
Required: 1
standard size - shaft diameter: 2.750"
Required: 1
+0.010" oversize - shaft diameter of the standard bearing: 2.750"
Required: 1
+0.020" oversize - shaft diameter of the standard bearing: 2.750"
Required: 1
+0.030" oversize - shaft diameter of the standard bearing: 2.750"
Required: 1
+0.040" oversize - shaft diameter of the standard bearing: 2.750"
Required: 1
standard size - shaft diameter: 2.086"
Required: 1
+0.010" oversize - shaft diameter: 2.086"
Required: 1
+0.020" oversize - shaft diameter: 2.086"
Required: 1
+0.030" oversize - shaft diameter: 2.086"
Required: 1
+0.040" oversize - shaft diameter: 2.086"
Required: 1
reconditioned, in exchange - feature: with oil channel to small end
3.4 and 3.8
Required: 1
reconditioned, in exchange - feature: no oil channel to small end
Required: 6