Bonnet and engine bay fittings 3.8 Series 1 (late), 4.2 Series 1, Series 1.5 plus Series 2 (1962-1970)
bonnet hinge - aluminium variant with 0.128" thickness
bonnet hinge - aluminium variant with 0.036" thickness
bonnet hinge - aluminium variant with 0.064" thickness
RH
3.8 and 4.2 Series 1 and Series 2 OTS to 1R1188 (RHD) and 1R9570 (LHD), FHC from 1R20270 (RHD) and 1R26387 (LHD) and 2+2 from 1R35353 (RHD) and 1R42118 (LHD) (1961-1969)
Required: 1
LH
3.8 and 4.2 Series 1 and Series 2 OTS to 1R1188 (RHD) and 1R9570 (LHD), FHC from 1R20270 (RHD) and 1R26387 (LHD) and 2+2 from 1R35353 (RHD) and 1R42118 (LHD) (1961-1969)
Required: 1
bonnet prop rod
3.8 and 4.2 Series 1 and Series 2 OTS to 1R1188 (RHD) and 1R9570 (LHD), FHC from 1R20270 (RHD) and 1R26387 (LHD) and 2+2 from 1R35353 (RHD) and 1R42118 (LHD) (1961-1969)
Required: 2
3.8 and 4.2 Series 1 and Series 2 OTS to 1R1188 (RHD) and 1R9570 (LHD), FHC from 1R20270 (RHD) and 1R26387 (LHD) and 2+2 from 1R35353 (RHD) and 1R42118 (LHD) (1961-1969)
Required: 4
3.8 and 4.2 Series 1 and Series 2 OTS to 1R1188 (RHD) and 1R9570 (LHD), FHC from 1R20270 (RHD) and 1R26387 (LHD) and 2+2 from 1R35353 (RHD) and 1R42118 (LHD) (1961-1969)
Required: 4
3.8 and 4.2 Series 1 and Series 2 OTS to 1R1188 (RHD) and 1R9570 (LHD), FHC from 1R20270 (RHD) and 1R26387 (LHD) and 2+2 from 1R35353 (RHD) and 1R42118 (LHD) (1961-1969)
Required: 4
3.8 and 4.2 Series 1 and Series 2 OTS to 1R1188 (RHD) and 1R9570 (LHD), FHC from 1R20270 (RHD) and 1R26387 (LHD) and 2+2 from 1R35353 (RHD) and 1R42118 (LHD) (1961-1969)
Required: 1
3.8 and 4.2 Series 1 and Series 2 OTS to 1R1188 (RHD) and 1R9570 (LHD), FHC from 1R20270 (RHD) and 1R26387 (LHD) and 2+2 from 1R35353 (RHD) and 1R42118 (LHD) (1961-1969)
Required: 1
bonnet, stainless steel reproduction including locking cams and operating rods
Required: 1
on bracket engaging locking hook on bonnet side panel
Required: 2
front. Complete kit with hinge and stay
Required: 1
for rubber seal between bonnet L/H valance and front frame side member
Required: 1
for rubber seal between L/H rear diaphragm and front frame side member
Required: 1
bonnet
4.2 Series 2 OTS from 1R1189 (RHD) and 1R9571 (LHD), FHC from 1R20271 (RHD) and 1R26388 (LHD) and 2+2 from 1R35354 (RHD) and 1R42119 (LHD) (1969-1970)
Required: 1
gas strud
4.2 Series 2 OTS from 1R1189 (RHD) and 1R9571 (LHD), FHC from 1R20271 (RHD) and 1R26388 (LHD) and 2+2 from 1R35354 (RHD) and 1R42119 (LHD) (1969-1970)
Required: 2
locking pin gas strud
4.2 Series 2 OTS from 1R1189 (RHD) and 1R9571 (LHD), FHC from 1R20271 (RHD) and 1R26388 (LHD) and 2+2 from 1R35354 (RHD) and 1R42119 (LHD) (1969-1970)
Required: 2
