Carburatore SU-HD6 - parti singole - XK150
without vent - with hexagonal brass head
Richiesto: 2
with piston
Richiesto: 2
fixed type. For standard mixture - marked: TL
Use with carburettors with following numbers: AUC865, AUC897 and AUC957
Richiesto: 2
fixed type. For standard mixture - marked: TU
Use with carburettors with following number: AUC985
Richiesto: 2
fixed type. For weakmixture - marked: SJ
Richiesto: 2
fixed type. For rich mixture - marked: WO3
Richiesto: 2
front carburettor
Use with carburettors with following numbers: AUC865, AUC897 and AUC957
Richiesto: 1
rear carburettor
Use with carburettors with following numbers: AUC865, AUC897 and AUC957
Richiesto: 1
front carburettor
Use with carburettors with following number: AUC985
Richiesto: 1
rear carburettor
Use with carburettors with following number: AUC985
Richiesto: 1
for 5/16" throttle spindles with standard size
Length: 115 mm
Richiesto: 1
for 5/16" throttle spindles with 0.010" oversize
Length: 235 mm
Richiesto: 1
idle control - complete kit with spring and washers
Richiesto: 2
throttle spindle. For bodies with worn cast in bushes, useable on SU and Zenith Stromberg carburettors with 5/16" throttle spindle
Richiesto: 4
for SU-H6 and HD6 carburettors - variant with standard size. Length: 6.3/8", diameter: 5/16", with slot for 1.1/2" and 1.3/4" throttle discs
Richiesto: 1
on rear carburettor
Richiesto: 1
throttle spindle on rear carburettor
Richiesto: 1
for ignition union on front carburettor
Richiesto: 1
float lid - with hexagonal zinc plated head
Richiesto: 2
front carburettor
Richiesto: 1
rear carburettor
Richiesto: 1
for SU carburettors - bore: 0.096"
Richiesto: 2
for SU-H, SU-HD and SU-HS type carburettors - superior replacement of needle valve and seat
Superior replacement of needle valve and seat 204291 (ill. 39)
Richiesto: 2
galleggiante - altezza del supporto del coperchio alla sospensione della forcella: 1/4". Si adatta solo al coperchio originale della camera del galleggiante
Richiesto: 2
for SU H & HD type carburettor, diameter: 1.7/8" - unsinkable' float, made from Nitrile rubber foam
Richiesto: 2
and spring - inside float chamber lid on SU carburettors
Richiesto: 2
float chamber and cast pipe to front carburettor
Richiesto: 1
auxiliary enrichment (thermo) carburettor to float chamber - for vehicles with SU-HD6 carburettors
Richiesto: 1
between cast pipe and thermo carburettor
Richiesto: 2
for auxiliary enrichment (thermo) carburettor
Richiesto: 1
for single carburettor
Comprising service kit 200203 (iil. 66) plus throttle disc and throttle spindle
Richiesto: 2
