Instruments and switches 4.2 Series 1.5 and Series 2 (1967-70)
BV2202/00 - reconditioned, in exchange. This item is sold on an exchange basis
Required: 1
BF2222/00 - reconditioned, in exchange. Black dial with white illumination and clear glass, black bezel, range: E-1/4-1/2-3/4-F
Required: 1
BF2222/00 - new item. Black dial with white illumination and clear glass, black bezel, range: E-1/4-1/2-3/4-F
Required: 1
PE2303/00 - reconditioned, in exchange. Black dial with white illumination and clear glass, black bezel, range 0-20-40-60 in lbs/in²
Required: 1
PE2303/00 - new item for negative earthed cars. Black dial with white illumination and clear glass, black bezel, range 0-20-40-60 in lbs/in²
Required: 1
BT2200/09 - new item. Black dial with white illumination and clear glass, black bezel, range: 30-70-110°C
Required: 1
CET3201/00 - reconditioned, in exchange. Diameter 60mm. Black dial with white illumination and clear glass, black bezel
Required: 1
CTE3107/01 - reconditioned, in exchange. Diameter 60mm. Black dial with white illumination and clear glass, black bezel - reconditioned. This item is sold on an exchange basis
Required: 1
electronic rev counter RVI4612/00 with 5" diameter for cars with negative earth. Black dial with white printing and flat glass, black bezel, range: 0-6000 RPM - reconditioned, in exchange
Required: 1
electronic rev counter RVI4614/01 with 5" diameter for cars with negative earth. Black dial with white printing and flat glass, black bezel, range: 0-6000 RPM - reconditioned, in exchange
Required: 1
model: SN6332-02, range: 0-260 KP/H, turns per Km: 760 - new item
Required: 1
SN6332/02 - reconditioned, in exchange. Range: 0-260 KP/H, final ratio: 3.31:1
Required: 1
SN6332/03 - reconditioned, in exchange. Range: 0-260 KP/H, final ratio: 3.54:1 - reconditioned
Required: 1
SN6322/10 - reconditioned, in exchange. Range: 0-260 KP/H, final ratio: 2.88:1
Required: 1
SN6332/05 - reconditioned, in exchange. Range: 0-260 KP/H, final ratio: 3.07:1
Required: 1
SN6332/06 - reconditioned, in exchange. Range: 0-160 MP/H, final ratio: 3.31:1 - reconditioned. This item is sold on an exchange basis
Required: 1
SN6332/01 - reconditioned, in exchange. Range: 0-160 MP/H, final ratio: 3.54:1
Required: 1
SN6332/08 - reconditioned, in exchange. Range: 0-160 MP/H, final ratio: 3.07:1
Required: 1
SN6332/07 - reconditioned, in exchange. Range: 0-160 MP/H, final ratio: 2.88:1
Required: 1
Please note: Add this article, if you wish to have a conversion to KMH in addition to your reconditioning
Required: 1
lighting instruments. All except tachometer
for bulbs with BA9s bayonet base - variant with screw connection for single wire
notes fuses
Required: 1
reproduction of the Lucas 4FJ type for 2 fuses - variant with lucar terminals
Required: 4
4FJ type for 2 fuses - variant with lucar terminals
Required: 4
on instrument console
Required: 1
resistor
Required: 1
retaining cowl
Required: 2
OTS and FHC LHD models with manual transmission
Required: 1
OTS and FHC RHD models with manual transmission
Required: 1
2+2 LHD models with manual transmission
Required: 1
2+2 RHD models with manual transmission
Required: 1
with 68" length
2+2 LHD models with automatic transmission
Required: 1
with 64" length for RHD models
2+2 RHD models with automatic transmission
Required: 1
warning lamp
Required: 1
warning lamp
Required: 1
hazard warning
Required: 1
in red with chrome bezel - hazard warning and brake fluid level
Required: 1
for warning lamp - hand brake and brake fluid level
Required: 1
heater control with nameplate - Illuminated variant
Required: 1
"Choke". complete unit with suround and bulb holder. Illuminated variant
4.2 Series 1.5 and 2 all (1967-70), Series 2 LHD OTS to 1R7747 FHC from 1R25430 and 2+2 from 1R40433 (1967-68)
Required: 1
"Choke" for Illuminated variant
4.2 Series 1.5 and 2 all (1967-70), Series 2 LHD OTS to 1R7747 FHC from 1R25430 and 2+2 from 1R40433 (1967-68)
Required: 1
choke knob
4.2 Series 1.5 and 2 all (1967-70), Series 2 LHD OTS to 1R7747 FHC from 1R25430 and 2+2 from 1R40433 (1967-68)
Required: 1
"Cold/Hot/Run", for choke, metal, not illuminated
4.2 Series 2 LHD OTS from 1R7748 FHC from 1R25431 and 2+2 from 1R40434 (1969-70)
Required: 1
with 'Choke' lettering - for vehicles with Zentih Stromberg carburettors
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
"Choke"
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
choke lever
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
choke lever
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
choke lever
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
choke lever
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
Befestigung Drehbolzen
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
retaining pivot bolt
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
retaining shifting plate
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
retaining shifting plate
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
retaining shifting plate
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
retaining base plate choke lever to dash board
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
retaining base plate choke lever to dash board
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
retaining base plate choke lever to dash board
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
retaining base plate choke lever to dash board
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1