Carburatore SU-HS2 parti singole MK3 - tutti i modelli europei. Modelli USA fino ottobre 1969
with valve
USA and Canada models from engine no. FE8155
Richiesto: 2
throttle spindle. For bodies with worn cast in bushes, useable on SU HS2 carburettors with 5/16" throttle spindle
For bodies with worn cast in bushes
Richiesto: 4
throttle spindle on front and rear carburettor - stainless steel reproduction
Richiesto: 2
and link - front carburettor
Richiesto: 1
and link - rear carburettor
Richiesto: 1
front carburettor
Richiesto: 1
for SU HS type carburettor - uprated 'unsinkable' type, made from closed cell Nitrile rubber foam, resistant to modern ethanol based fuels
Richiesto: 2
for SU carburettors - bore: 0.096"
Richiesto: 2
for SU-H, SU-HD and SU-HS type carburettors - superior replacement of needle valve and seat
Superior replacement of needle valve and seat. This valve is less likely to stick open or over fuel on run over
Richiesto: 2
with piston
Richiesto: 2
piston return - colour: red, spring rate: 4.5 oz
Standard type
Richiesto: 2
piston return - colour: yellow, spring rate: 8 oz
Uprated type
Richiesto: 2
fixed type - marked: BQ
Standard mixture for AUD257 carburettors
Richiesto: 2
fixed type - marked: DD
Standard mixture for AUD275 carburettors
Richiesto: 2
fixed type - marked: AN
Weak mixture
Richiesto: 2
fixed type - marked: H6
Rich mixture
Richiesto: 2
assembly. For SU-HS carburettors with fixed metering needle
Richiesto: 2
Part of our jet bearing kit 2735 (ill. 43)
Richiesto: 2
jet bearing
Part of our jet bearing kit 2735 (ill. 43)
Richiesto: 2
jet bearing
Part of our jet bearing kit 2735 (ill. 43)
Richiesto: 2
main jet
Part of our jet bearing kit 2735 (ill. 43)
Richiesto: 2
for two SU-HS2 type carburettors. Comprising service kit 214281 plus throttle discs and throttle spindles
Richiesto: 1
