Impianto idraulico dei freni - a circuito singolo
0.75" bore size
Austin Mini MK1 with "dry" suspension upto (VIN) A-A2S7/359770 RHD, /358922 LHD, Morris Mini MK1 with "dry" suspension upto (VIN) M-A2S4/170653 (less 169944 to 170000), Austin Cooper 997 cc upto (VIN) C-A2S7/213829, Morris Cooper 997 cc upto (VIN) K-A2S4/213550
Richiesto: 1
0.70" bore size
Austin Mini MK1 with "dry" suspension (VIN) A-A2S7/359771 RHD on, /358923 LHD on Morris Mini MK1 with "dry" suspension (VIN) M-A2S4/170654 on (plus 169944 to 170000) Mini MK1 with hydrolastic from september 1964 on, Mini MK2 upto (VIN) C-A2S7/2333A
Richiesto: 1
with 0.70" bore size and metal reservoir
MK2 from chassis no. C-A2S7/2333A with single line brakes to 1977, Austin Cooper 997cc from chassis no. C-A2S7/213829, Morris Cooper 997 cc from chassis no. M-A2S4/213551 and Morris Cooper 998 cc with hydrolastic suspension from chassis no. K-A2S4/382184
Richiesto: 1
with 0.70" bore size and plastic reservoir
MK2 from chassis no. C-A2S7/2333A with single line brakes to 1977, Austin Cooper 997cc from chassis no. C-A2S7/213829, Morris Cooper 997 cc from chassis no. M-A2S4/213551 and Morris Cooper 998 cc with hydrolastic suspension from chassis no. K-A2S4/382184
Richiesto: 1
0,70" bore size
Cooper S MK1 to MK3, 1275 GT with single line system 1974 upto 1977
Richiesto: 1
0,70" bore size, plastic reservoir drilling 0.7", single circuit, 10" wheel
Cooper S MK1 to MK3, 1275 GT with single line system 1974 upto 1977
alternative to master cylinder 470382 with tin reservoir
Richiesto: 1
with single line brake system - identified by conical piston return spring and cup type main seal
Richiesto: 1
with 0.7" bore. Identify by 1 ring type seal and 1 cup type seal
For brake master cylinder 469203, 17612 and 470382
Richiesto: 1
with 0.7" bore. Identify by 2 ring type seals
For master cylinder 289085 and 304859
Richiesto: 1
extension to master cylinder
if fitted
Richiesto: 1
retaining extension to master cylinder
if fitted
Richiesto: 1
master cylinder with metal reservoir
Richiesto: 1
push rod brake master cylinder to pedal
Richiesto: 1
LHD
early cars upto introduction of pedal 468155
Richiesto: 1
RHD
early cars upto introduction of pedal 311937
Richiesto: 1
LHD
pre 1976, upto (VIN)124423
Richiesto: 1
RHD
pre 1976, upto (VIN)124423
Richiesto: 1
pre 1976, up to (VIN)124423
also used on clutch pedal
Richiesto: 1
for rear brakes, fitted to subframe
Mk1 and Mk2 (1959-69) including Cooper and Cooper S (1961-71) plus Mk3 Cooper S (1971-73)
Richiesto: 1
for rear brakes, fitted to subframe
848/998 cc, MK3 on
Richiesto: 1
mechanical, fitted to pedal box
approx 1974 on
if fitted
Richiesto: 1
