Freni posteriori

RH rear - please note: depending on which wheel cylinder is fitted, you need to drill a new hole for wheel cylinder locating roll pin

LH rear - please note: depending on which wheel cylinder is fitted, you need to drill a new hole for wheel cylinder locating roll pin

retaining anchor plate to radius arm

retaining anchor plate to radius arm

retaining anchor plate to radius arm

for control hole on rear brake anchor plate

1997 on and late replacement anchor plates

0.750" diameter

all single line and tandem front/rear brake systems that not listed below

Genuine casting: 12

for wheel cylinder,1063, diameter: 0.750"

diameter: 0.625"

Mini MK1 with dry susspension Chassis A2S7/359771 on, Mini MK1 with hydrolastic susspension september 1964 on, Austin Cooper 997 cc with dry susspension Chassis C-A2S7/382832 on, Morris Cooper 998 cc with hydrolastic susspension Chassis K-A2S4/382184 on, Cooper S MK1 with brake servo 336594, Cooper S MK2 and 1275GT with brake servo 326927 (10" wheels)

Genuine casting: 10

for wheel cylinder 12866, diameter: 0.625"

0.6875" diameter

1275GT single line and tandem digonal brake systems Chassis 19416 upto 21569A 1974-1976, Innocenti Cooper 1300

Genuine casting: 11

for wheel cylinder 1067, diameter: 0.6875"

0.5" diameter

1275GT with single line and tandem digonal brake systems from chassis no. 21570A (1976-78) plus 848 cc and 998 cc models with tandem digonal brake systems for Europa (not UK and Norway)

Genuine casting: 8

für Radbremszylinder 305722, Durchmesser: 12,70 mm

0.5625" diameter

848/998 cc tandem digonal brake system 1977 upto 1978, Europe 1977 upto 1979 not for Van and Pick-Up, ERA Turbo (without regulator valve on rear axle)

Genuine casting: 9

rear - feature: bore size: 0.5625", genuine casting: 6

848 cc and 998 cc models for Norwegen und Japan with tandem digonal brake systems

for wheel cylinder 215690 and 308171, diameter: 0.5625"

wheel cylinder to backplate

wheel cylinder to anchor plate

for fitting wheel cylinder circlips

1/4" x 28 UNF, length 27.7 mm, not for wheel cylinder 215690 und 308171

3/8" x 24 UNF, length 30.9 mm, only for wheel cylinder 215690 und 308171

on bleed screw

for brake shoes, contens: 1x adusterbolt and 2x adjuster wedges, for one anchor plate

for brake shoes

part of adjuster kit 5371

for brake shoes

part of adjuster kit 5371

posteriore - cilindro ruota a 2 pistoni, larghezza pattini di circa 32 mm

posteriore - cilindro ruota a 2 pistoni, larghezza pattini di circa 32 mm

Kit revisione di freni per pneumatici 12" (ciascuno per 1 asse) Dietro: ganasce del freno, molle di richiamo, cilindro di azionamento ganasce freni diametro 19 mm

brake shoes - 4 piece set for one axle

for brake shoes, cylinder end

part of return spring kit 343038

for brake shoes, adjuster end

part of return spring kit 343038

hand brake cable to radius arm - right hand

hand brake cable to radius arm - left hand

handbrake on brake shoes - right and left hand

operating lever handbrake

standard

upto 1984, not Cooper S, Innocenti Cooper 1300, 1275GT

retaining brake drum to flange, for brake drum 14805

upto 1984, not Cooper S, Innocenti Cooper 1300, 1275GT

1" wider as standard

Cooper S, Innocenti Cooper 1300, 1275GT and all 1984 on

retaining brake drum to flange, for brake drum 14806

Cooper S, Innocenti Cooper 1300, 1275GT and all 1984 on