Parti riparazione pavimento e battitacco - berlina
right hand - as genuine, 4 small noses
MK1/2 (1959 - 1969)
Richiesto: 1
left hand - as genuine, 4 small noses
MK1/2 (1959 - 1969)
Richiesto: 1
RH - aftermarket with 6 large noses
from MK3 on (1970-2000)
Richiesto: 1
RH - genuine sill with 6 large noses
from MK3 on (1970-2000)
Richiesto: 1
LH - aftermarket with 6 large noses
from MK3 on (1970-2000)
Richiesto: 1
LH - genuine sill with 6 large noses
from MK3 on (1970-2000)
Richiesto: 1
right hand, 4.5" wide, 6 large noses
MK3 on (1970 - 2000)
Richiesto: 1
left hand, 4.5" wide, 6 large noses
MK3 on (1970 - 2000)
Richiesto: 1
Outer sill - right hand, 4 small noses, 8" wide
MK1/2 (1959 - 1969)
Richiesto: 1
Outer sill - left hand, 4 small noses, 8" wide
MK1/2 (1959 - 1969)
Richiesto: 1
Outer sill - right hand, 6 large noses, 6" wide
MK3 on (1970 - 2000)
Richiesto: 1
Outer sill - left hand, 6 large noses, 6" wide
MK3 on (1970 - 2000)
Richiesto: 1
left hand - full length, not tailored
Richiesto: 1
left hand - left hand, tailored, lenght to rear box
Richiesto: 1
right hand - full lenght, not tailored
Richiesto: 1
Inner sill - right hand, tailored, lenght to rear box
Richiesto: 1
with crossmember extension - right hand
Richiesto: 1
with crossmember extension - left hand
Richiesto: 1
with nut - in sill front right and left - sill reinforcement and for slinging shoe fitting
Richiesto: 2
for slinging shoe, rear, right hand
Richiesto: 1
for slinging shoe, rear, left hand
Richiesto: 1
with inner and outer sills, crossmember, 'round' tunnel
MK1 Saloon with 'Magic Wand' gearchange (1960-67)
Richiesto: 1
with inner and outer sills, crossmember, 'round' tunnel for remote control type gearchange only
Saloon MK2/3 and Cooper/Cooper S MK1-3
Richiesto: 1
main, with inner sills, without outer sills, crossmember and heelboard, length 140 cms - idendification: round tunnel
1960 on approx to 1973
without cutting for gear stick, could be used for cars with 'Magic Wand type' gear change as well as for cars with 'Remote type' gear change
Richiesto: 1
with inner and outer sills, crossmember and heelboard, length: 140 cms - identification: latest 1991 on rib design and 'square' tunnel
Saloon (1976-96)
Richiesto: 1
with inner & outer sills, crossmember and heelboard, length: 140 cms - idendification: square tunnel
1996 on with seat belt pre-tensioners
identification: 'square' tunnel, latest 1991 om rib design
Richiesto: 1
main, with inner sills, without outer sills, crossmember and heelboard, length 140 cms - genuine BMHT
1976 on
identification: 'square' tunnel, latest 1991 om rib design
Richiesto: 1
assembly, front to rear, with inner & outer sills - right hand
MK1/2 (1959 - 1969)
identification: Outer sill with 4 small noses
Richiesto: 1
assembly, front to rear, with inner & outer sills - left hand
MK1/2 (1959 - 1969)
identification: Outer sill with 4 small noses
Richiesto: 1
RH, complete panel with inner sill and outer sill - identification: outer sill with 6 large noses
MK3, MK4 und MK5 carburettor models (1970-92)
Richiesto: 1
LH, complete panel with inner sill and outer sill - identification: outer sill with 6 large noses
MK3, MK4 und MK5 carburettor models (1970-92)
Richiesto: 1
RH front and rear, repair panel with inner sill only
MK3, MK4 und MK5 carburettor models (1970-92)
Richiesto: 1
LH front and rear, repair panel with inner sill only
MK3, MK4 und MK5 carburettor models (1970-92)
Richiesto: 1
genuine - front to rear, with inner sill, without outer sill - right hand
latest 1992 Injection cars on
Could also be used for earlier cars
Richiesto: 1
genuine - front to rear, with inner sill, without outer sill - left hand
latest 1992 Injection cars on
Could also be used for earlier cars
Richiesto: 1
front, right hand - repair panel
upto 1992 Injection cars
Richiesto: 1
RH front - restauration quality
upto 1992 Injection cars
Richiesto: 1
front, right hand - restoration quality
latest 1992 Injection cars on
Richiesto: 1
genuine Rover - front, right hand
Richiesto: 1
front, left hand - repair panel
upto 1992 Injection cars
Richiesto: 1
LH front - restauration quality
upto 1992 Injection cars
Richiesto: 1
front, left hand - restoration quality
latest 1992 Injection cars on
Richiesto: 1
genuine Rover - front, left hand
Richiesto: 1
Toeboard assembly, bulkhead to floor panel - for cars with solid mounted front subframe
Mk1-3 (1959-76)
Richiesto: 1
Pannello del pavimento del vano pedali fino alla testata, compresa la piastra di fissaggio dello sterzo
Richiesto: 1
dal 1976 - sottotelaio montato su gomma
Richiesto: 1
for 'round' tunnel
upto introduction rod-change gearbox, saloon to 12/1972
Richiesto: 1
for 'square' tunnel
rod-change type gearbox on, saloon 01/1973 on
Richiesto: 1
Exhaust Tunnel front to rear, round type - cars with 'Magic Wand' gear shift
Saloon MK1 (1960-67)
Richiesto: 1
Exhaust Tunnel front to rear, round type - cars with 'Remote-Control' gear shift
Saloon Mk1/2/3 (1961-72)
Richiesto: 1
Exhaust Tunnel front to rear, square type - cars with 'Rodchange' gear shift
Saloon Mk3 on (1973-96)
Richiesto: 1
Exhaust Tunnel front to rear, square type - cars with 'Rodchange' gear shift
Saloon Mk3 on (1973-96)
Richiesto: 1
Exhaust Tunnel front to rear, square type with strengthening bracket for pre tensioned seat belts - cars with 'Rodchange' gear shift
Saloon (1997-2000)
Richiesto: 1
rear subframe mount - right hand
part of heelboard
Richiesto: 1
rear subframe mount - left hand
part of heelboard
Richiesto: 1
Wheelarch, pocket filler panel to subframe fitting - right hand
Richiesto: 1
Wheelarch, pocket filler panel to subframe fitting - left hand
Richiesto: 1
rear companion box - right hand
Richiesto: 1
rear right hand
MK1/2 (1959 - 1969)
Richiesto: 1
rear left hand
MK1/2 (1959 - 1969)
Richiesto: 1
RH - with inertia seat belt mount
1990 onwards, must be modified when using on earlier models
Richiesto: 1
LH - with inertia seat belt mount
1990 onwards, must be modified when using on earlier models
Richiesto: 1
complete with rear seat pan, including battery box
Mpi variant, also suitable for all earlier models (1959-2000)
Richiesto: 1
boot floor part - rear, 10" wide
Richiesto: 1
boot floor part - right hand
Richiesto: 1
late type, without 'Roto-Dip' hole
Richiesto: 1
spare wheel on boot floor
MK1 saloon
Richiesto: 1
shock absorber mount in rear wheel arch
Richiesto: 2
wheelarch and bootfloor - right hand
Richiesto: 1
wheelarch and bootfloor - left hand
Richiesto: 1
rear valance, inner - right hand
Richiesto: 1
rear valance, inner - left hand
Richiesto: 1
rear valance, inner, with subframe support - right hand
Richiesto: 1
rear valance, inner, with subframe support - left hand
Richiesto: 1
