Open: 24 hours 7 days a week


1860 cc. reconditioned, 'Stage 2' lead free spec. with clutch kit - exchange

MG MGB rubber bumper with engine code: 18V (from September 1974). Identification: top timing mark on front cover

All our engines are developed for lead free applications. All engines are equipped with new pistons, piston pins, piston rings, main and big end bearings, small-end bushes, timing chain, gaskets, front oil seal and core plugs. Every cylinder head is inspected for cracks. Valve guides are measured for wear and either resized or renewed to conform to original tolerances. Valve seats are machined so as to retain the correct seat angles, widths, valve heights and valve seating concentric with the centre line of the valve guide bore. Valves are replaced. All valve springs are tested for squareness, free height and compressed load length. Cylinder heads are checked for distortion and thickness. When machining the cylinder head face, particular attention is paid to maintaining the correct surface finish specified by the gasket manufacturer. Camshafts are either replaced with a new unit or reprofiled to their original valve timing and lift specifications. Crankshafts are grinded and polished to produce the exact dimensions and surface finish required. Each cylinder block is rebored or resleeved and honed to give the precise surface finish and cross-hatch required. All main housings are measured for size, ovality, taper and weight-graded into engine sets. Every con rod is checked for alignment and weight-graded into engine sets. Oil pump: The clearance between rotor and body is measured. The oil pressure valve is dismantled and cleaned. All non-conforming parts are replaced. All our engines are hot run under their own power in purpose-built test cells. Every engine is subjected to a series of checks and the results are recorded against each specific engine serial number. On all our engines we grant with professional installation 6-month guarantee in accordance with our general terms of trade.
Specifications: fully balanced, 717 camshaft with a power range from 1800 to 6500, improved double row timing chain with verier timing gear, 'Stage 2' cylinder head with modified ports and chambers, double valve springs, gas-flowed enlarged valves