Open: 24 hours 7 days a week
 

Tools for vehicle diagnosis

Ladies and Gentlemen, valued customers,

even the most traditionally working garages use all kinds of electronical helpers to ensure good service quality. Our tool department went out and collected some of the most helpful devices. So with a few modest and clear investments you'll be able to keep up with the professionals.

If questions on how to use arose, we'll be glad to help. And sell you technical literature where useful.

Best regards from the SC Parts Sales team


Electronic Photo Tachometer

Electronic Photo Tachometer

An electronic rev counter that measures all types of rotating parts or shafts. Speed change by switching on air conditioning or other consumers? Determine whether the measured number is within the permissible limits. How many revs? Alternator, fan motor, cardan shaft, axle shaft, rear wheel, possibilities are endless: Just attach reflector, point at rotating item and get result.

Laser pickup. With 5-digit LCD display, measuring range from 2.5 to 99.999 rpm, accuracy: +/- 0.05% + 1RPM. Measurement distance from 50 to 250 mm. Two 350 mm long reflective test strips are included. Stores the min. rotation speed, the max. rotation speed and the last measured value. Operates with 4 pcs. 1.5V AA batteries.


Digital Laser Thermometer

Digital infrared thermometer with built-in laserpointer for exact measurement, range from -20°C to + 520°C or -4°F to 968°F
Now with an easy-to-use pistol design and illuminated display. Suitable for a lot of tasks around the car and workshop. Check the temperature of the engine, muffler, tyres and brakes. Which cylinder is getting hot? A fast detection of faulty components can save time and prevent expensive repairs and severe damage. A 9V battery is included.
Digital Laser Thermometer

Best practice: Battery tester

Best practice: Battery tester

for testing 6- and 12 Volt batteries up to 100 A. Gives you information about the state of charge, starting current and alternator output. Easy to use with heavy duty leads and clamps.


Digital Multimeter for Automotive Diagnostics

Digital Multimeter for Automotive Diagnostics

Digital multimeter, specially designed for automative use, with a rotary switch for selection of the 24 different functions and ranges. Suitable for the measurement of DC volts and amps, resistance, dwell, rpm on 4, 6, 8 and 12-cylinder engines. The testing of diodes is also possible. The shock resistant housing is made of rubber. Supplied with 2 sets of cables: one pair with crocodile clamps and one pair with probes. A 9 V block battery and vinyl storage bag is included.


Complete kit for shed and garage

Infrared thermometer, digital multimeter and digital measuring clamp for AC. Comes in a handy aluminum case.
Digital clamp meter:
• Alternating voltage 200 V - 20,000 V
• DC voltage of 200 mV up to 2,000 V
• AC 2 A to 600 A

Digital Multimeter:
• Alternating voltage 2V to 600V
• DC voltage of 200 mV to 600 V
• DC current 200 mA to 10A
• AC 200 mA to 10A

Both measuring instruments:
• Resistance 200 Ω to 20 MΩ
• Temperature - 20 to 1000 ° C (switchable to ° F)
• Diode test
• Acoustic continuity test

Infrared thermometer:
• -20 to + 320 ° C
• with laser pointer
• switchable to ° F

Complete kit for shed and garage

Comprehensive check of brake liquids

Easy to calibrate and easy to use, measures the percentage of moisture within the brake fluid and lets you now fast if your fluid is still good or if it needs to be replaced (needs 9V battery). Brake fluid needs to be checked at least once a year.

Comprehensive check of brake liquids

Exhaust CO analyser

Exhaust CO analyser

Digital exhaust CO analyser with pulse pump.
This gas tester can simply be run with a regular car battery. The pulse pump uses the pressure built up within the exhaust system, there actually is no moving part that could wear out or needs to be cleaned. Water gets separated in the built-in water trap. It is accurate down to 0.5 % C.O. measurement and can be easily calibrated in air.

Test device for lambda sensors

Test device with 20-digit LED display, measuring range from 0 to 1 volt, in steps of 0.05 volts, operates with 12 volt vehicle power supply.
The engine management of injected petrol engines requires a permanent feedback from the lambda sensor, regarding the oxygen concentration in the exhaust gases. If the signal of the sensor is faulty, it leads to increased fuel consumption and reduced engine performance. With this device, the signal output of the Lambda sensor can be measured directly.

Test device for lambda sensors

Onlineshop: www.scparts.co.uk
All orders are subject to our Terms & Conditions
Prices within a newsletter are valid only for a limited period of time. If not stated otherwise, the offers are valid for one month. Technical details and prices are subject to change without notice.

New service for our customers

PayPal checkout
the fastest and easiest way for shopping

One click and ready

If you are no longer interested you can unsubscribe instantly: please send an e-mail tononewsletter@scparts.co.uk