with hydraulic lifting device, 680 kg load capacity, up to 225 mm tyre width. A few steps on the hydraulic pedal, the holding rails slide together and the vehicle is lifted. You can:

• 2 cars in a transverse row
• accurate to the millimetre, in the smallest of spaces, comfortable and easy to manoeuvre
• no unnecessary starting of the engine, just to manoeuvre a few meters
• no back trouble because you try to push a full-size sedan on your own
• maximum use of space in garage or shed
• turn vehicle 360° on the spot.

New and only from SC Parts: All spare parts for all manoeuvring aids available directly from stock.

For tire widths up to 305mm / 12".

For vehicles with a tire width of up to 330mm / 13".

Even the space-saving manoeuvring aids can be stored in a space-saving manner. There is storage space for 4 manoeuvring aids on each transport stand. The sturdy nylon rollers can be rotated freely. Each manoeuvring trolley is put on one of the four square holders from above, as shown.

flat manoeuvring roller without hydraulics for a maximum load of 455 kg. Dimensions: 390 mm wide and 590 mm long, therefore also suitable for tyres up to 225 mm wide. Rollers not lockable. A good solution for smaller vehicles: Welded from solid sheet steel with bolted nylon rollers. Simply lift the vehicle with the jack, roll carts underneath and you're done.

Manoeuvring rail for motorcycles with side stand and up to 350 kg. With lockable wheels, simply slide the motorcycle on and then place it on the side stand in the mould. The motorcycle stands securely. If you release the rollers, the motorcycle can slide to any position. Several vehicles can be placed next to each other in the garage to save space.

Somehow the car has to get into the manoeuvring aids. The easiest way is with this maneuvering jack. The solution for lifting heights of up to 50cm and larger garages. Hydraulically operated, the jack has a lifting capacity of 3 tons (this is enough for vehicles with up to 6 tons empty weight). The pump rod is at the same time a drawbar, the idle travel can be quickly pumped away with the pedal. The drain valve allows sensitive and millimetre accurate lowering. Two lateral, 360° swivel casters allow easy manoeuvring. Weight is about 40 kg.

To lift body or frame, we recommend our high lifting jack as an alternative for confined spaces. Height min. 150 mm, max. 1200 mm, capacity max. 3500 kg, weight: 16.6 kg. The jack enables lifting and lowering especially of offroad vehicles.