Steering rack
new item for LHD models
all models with 10" and 12" wheels (1959-2000)
Required: 1
for LHD models. High ratio type for quick steering
all models with 10" and 12" wheels (1959-2000)
Required: 1
for LHD models. Variant with lock stops to prevent the larger 13" wheels from catching on the inner wing on full lock
Sportspack models with 13" wheels
Required: 1
new item for RHD models
all models with 10" and 12" wheels (1959-2000)
Required: 1
for RHD models. High ratio type for quick steering
all models with 10" and 12" wheels (1959-2000)
Required: 1
for RHD models. Variant with lock stops to prevent the larger 13" wheels from catching on the inner wing on full lock
Sportspack models with 13" wheels
Required: 1
two piece set with the same diameter on both gaiters
Required: 1
two piece set with a different diameter on each gaiter
Required: 1
two piece set - replacement rubber boots for all types of steering racks
Required: 1
without further parts
ONLY for steering racks with OE no.: 2A6205, 21A368, 21A715 (Manufacturer 'Camgears') • Austin Mini chassis no. to A-A2S7-453263 • Morris Mini chassis no. to M-A2S4-221439, less 220357 to 221000
Required: 2
only for steering racks with OE no.: 21A1422 (manufacturer: Camgears)
Austin Mini from chassis no. A-A2S7-453264 on and Morris Mini from chassis no. M-A2S4-221439 on, plus chassis no. 220357 to 221000
Required: 2
tie rod - one car side
MK2 1968 on
Required: 2
10 mm longer version. Recommended for vehicles with negative camber and also for lowered cars
Required: 2
track rod end
part of track rod 213895 and 296160
Required: 2
track rod end - Polyurethane
alternative for gaiter item no. 9272
Required: 2
for gaiter track rod end
part of track rod 213895 and 296160
Required: 2
self locking, 3/8" UNF
note: Thread on track rod could be either imperial or metric. Please check before ordering. Imperial 3/8" UNF nuts use a 9/16"AF spanner.
Required: 2
x M10
note: Thread on track rod could be either imperial or metric. Please check before ordering. Metric nuts use a 17 mm spanner.
Required: 2
rack and pinion
Required: 1
