Radiator and thermostat housing - Twin Cam
new item
Required: 1
with standard copper core - reconditioned, in exchange
Required: 1
original brass type - with 9/16" BSP threadq
Required: 1
radiator
Required: 1
Required: 1
on cylinder head for water inlet
Required: 1
elbow to cylinder head
Required: 1
three-piece set, consisting of: Thermostat housing, cover and gasket
Required: 1
three-piece set, consisting of: Thermostat housing, cover and gasket
Required: 1
Required: 1
radiator - pressure: 7 PSI, 1" depth
To chassis no. 651
Required: 1
expansion tank - variant without breather with 58 mm diameter
From chassis no. 652
Required: 1
expansion tank
Required: 1
cooling system
To chassis no. 651
Required: 1
overflow pipe to thermostat housing
To chassis no. 651
Required: 1
overflow pipe to cylinder block blanking plate
To chassis no. 651
Required: 1
overflow pipe to expansion tank
To chassis no. 651
Required: 1
expansion tank to relief valve
From chassis no. 652
Required: 1
cooling system
From chassis no. 652
Required: 1
cooling system overflow
From chassis no. 652
Required: 1
relief valve
From chassis no. 652
Required: 1
relief valve to bracket
From chassis no. 652
Required: 2
