Camshaft and crankshaft 4.2 petrol engine
standard size - supplied in 5 piece kits
4.2 V8 LSE to engine no. 40D09581B (1992-94)
Required: 1
standard size - supplied in 5 piece kits
4.2 V8 Efi from engine no. 40D09582B (1994-96)
Required: 1
standard size. Specifications: 4.2 litre V8 engine, 3-ring piston, standard bore size: 3.498", compression ratio: 8.94:1
V8 with engine no. D40
Required: 1
+0.020" oversize. Specifications: 4.2 litre V8 engine, 3-ring piston, standard bore size: 3.498", compression ratio: 8.94:1
V8 with engine no. D40
Required: 1
standard size. Specifications: 4.2 litre V8 engine, 3-ring piston, standard bore size: 3.498", compression ratio: 8.94:1
Required: 8
0.020" oversize. Specifications: 4.2 litre V8 engine, 3-ring piston, compression ratio: 8.94:1
Required: 8
standard, 3 ring piston. 2 compression rings, 1 oil ring
Required: 1
standard, 3 ring piston. 2 compression rings, 1 oil ring
Required: 8
+0.020", 3 ring piston. 2 compression rings, 1 oil ring
Required: 8
- sizes: 94.00 x 97.933 x 141.732 mms
without illustration
Required: 8
with standard size - shaft diameter: 2"
Required: 1
with +0.010" oversize - shaft diameter of the standard bearing: 2"
Required: 1
with +0.020" oversize - shaft diameter of the standard bearing: 2"
Required: 1
with +0.030" oversize - shaft diameter of the standard bearing: 2"
Required: 1
with +0.040" oversize - shaft diameter of the standard bearing: 2"
Required: 1
crankshaft
4.2 V8 LSE from engine no. 40D09582A
Required: 1
'short nose' type without bearings - new item
V8 to engine no. 40D09581
Required: 1
'short nose' type without bearings - reconditioned. This item is sold on an exchange basis so a core unit surcharge will apply
V8 to engine no. 40D09581
Required: 1
'long nose' type without bearings - new item
V8 from engine no. 40D09582
Required: 1
'Long nose' type without bearings - reconditioned. This item is sold on an exchange basis so a core unit surcharge will apply
V8 from engine no. 40D09582
Required: 1
crankshaft. Length: 1.1/16" - outer diameter: 15/16" - inner diameter: 19,1". Fits into crankshaft
Required: 1
with standard size - shaft diameter: 2.2992"
Required: 1
with +0.010" oversize - shaft diameter of the standard bearing: 2.2992"
Required: 1
with +0.020" oversize - shaft diameter of the standard bearing: 2.2992"
Required: 1
with +0.030" oversize - shaft diameter of the standard bearing: 2.2992"
Required: 1
with +0.040" oversize - shaft diameter of the standard bearing: 2.2992"
Required: 1
with ring gear - new item
Vehicles with manuel gears
Required: 1
Models with power steering without air condition
Required: 1
Models with air condition without power steering
Required: 1
with starter ring
Vehicles with automatic transmission
Required: 1
flywheel automatic transmission
Vehicles with automatic transmission
Required: 1
flywheel automatic transmission, front position
Vehicles with automatic transmission
Required: 1
flywheel automatic transmission
Vehicles with automatic transmission
Required: 1
retainig guide plate to flywheel
Vehicles with automatic transmission
Required: 4
retaining ring gear to flywheel
Vehicles with automatic transmission
Required: 10
retaining packing plate to flywheel
Vehicles with automatic transmission
Required: 4
retaining flywheel to chrankshaft
Vehicles with automatic transmission
Required: 6
Vehicles with automatic transmission
Required: 4
