Camshaft and crankshaft 3.9 petrol engine
Classic: 3.9 V8 from VIN...FA351033 to MA664120 (1988-96)
Required: 1
standard size - supplied in 5 piece kits
Required: 1
standard size. Specifications: 3.9 litre V8 engine, 3-ring piston, standard bore size: 3.7", compression ratio: 8.13:1
Required: 1
+0.020" oversize. Specifications: 3.9 litre V8 engine, 3-ring piston, standard bore size: 3.7", compression ratio: 8.13:1
Required: 1
standard size. Specifications: 3.9 litre V8 engine, 3-ring piston, standard bore size: 3.7", compression ratio: 9.35:1
Required: 1
+0.020" oversize. Specifications: 3.9 litre V8 engine, 3-ring piston, standard bore size: 3.7", compression ratio: 9.35:1
Required: 1
standard size. Specifications: 3.9 litre V8 engine, 3-ring piston, standard bore size: 3.7", compression ratio: 8.13:1
Required: 8
+0.020" oversize. Specifications: 3.9 litre V8 engine, 3-ring piston, standard bore size: 3.498", compression ratio: 8.13:1
Required: 8
standard size. Specifications: 3.9 litre V8 engine, 3-ring piston, standard bore size: 3.7", compression ratio: 9.35:1
Required: 8
+0.020" oversize. Specifications: 3.9 litre V8 engine, 3-ring piston, standard bore size: 3.7", compression ratio: 9.35:1
Required: 8
standard, 3 ring piston. 2 compression rings, 1 oil ring
Required: 1
standard, 3 ring piston. 2 compression rings, 1 oil ring
Required: 8
+0.020", 3 ring piston. 2 compression rings, 1 oil ring
Required: 8
with standard size - shaft diameter: 2"
Required: 1
with +0.010" oversize - shaft diameter of the standard bearing: 2"
Required: 1
with +0.020" oversize - shaft diameter of the standard bearing: 2"
Required: 1
with +0.030" oversize - shaft diameter of the standard bearing: 2"
Required: 1
with +0.040" oversize - shaft diameter of the standard bearing: 2"
Required: 1
retaining pulley to crankshaft. Identify: models for use with starting handle
Required: 1
- Identify: models for use with starting handle
Required: 1
crankshaft
V8 to engine no. 35D08966B, 36D25523B, 37D01931B, 28D27330B
Required: 1
crankshaft
3.9 V8 Efi from engine no. 5D08967B, 36D25155B, 37D01932B and 38D27331B
Required: 1
'short nose' without bearings - new item
V8 bis engine no. 35D08966B, 36D25523B, 37D01931B, 28D27330B
Required: 1
'short nose' - reconditioned, in exchange
V8 to engine no. 35D08966B, 36D25523B, 37D01931B, 28D27330B
Required: 1
"Long Nose" without bearings, new item
V8 from engine no. 35D08967B, 36D25524B, 37D01932B, 28D27331B
Required: 1
"Long Nose" exchange. Reground with bearings
V8 from engine no. 35D08967B, 36D25524B, 37D01932B, 28D27331B
Required: 1
crankshaft. Length: 1.1/16" - outer diameter: 15/16" - inner diameter: 19,1". Fits into crankshaft
Required: 1
with standard size - shaft diameter: 2.2992"
Required: 1
with +0.010" oversize - shaft diameter of the standard bearing: 2.2992"
Required: 1
with +0.020" oversize - shaft diameter of the standard bearing: 2.2992"
Required: 1
with +0.030" oversize - shaft diameter of the standard bearing: 2.2992"
Required: 1
with +0.040" oversize - shaft diameter of the standard bearing: 2.2992"
Required: 1
with ring gear - new item
Vehicles with manuel gears
Required: 1
with ring gear - exchange
Vehicles with manuel gears
Required: 1
Models with power steering without air condition
Required: 1
Models with air condition without power steering
Required: 1
with starter ring
Vehicles with automatic transmission
Required: 1
flywheel automatic transmission
Vehicles with automatic transmission
Required: 1
flywheel automatic transmission, front position
Vehicles with automatic transmission
Required: 1
flywheel automatic transmission
Vehicles with automatic transmission
Required: 1
retainig guide plate to flywheel
Vehicles with automatic transmission
Required: 4
retaining ring gear to flywheel
Vehicles with automatic transmission
Required: 10
retaining packing plate to flywheel
Vehicles with automatic transmission
Required: 4
retaining flywheel to chrankshaft
Vehicles with automatic transmission
Required: 6
Vehicles with automatic transmission
Required: 4
