Internal electrics
36262 - exchange item for positive earthed cars
Required: 1
model: 36342A, black with white illumination and clear glass, black bezel, pointer: overhead, range: C-0-D, 60 amps - new item with dual polarity
Required: 1
BF2200/00 - exchange item. Black dial with white illumination and clear glass, black bezel, range: E-1/4-1/2-F
Required: 1
PE2300/02 - exchange item. Black dial with white illumination and clear glass, black bezel, range 0-20-40-60 in lbs/in²
Required: 1
PE2300/02 - new item for positive earthed cars. Black dial with white illumination and clear glass, black bezel, range 0-20-40-60 in lbs/in²
Required: 1
PE2300/02 - new item for negative earthed cars. Black dial with white illumination and clear glass, black bezel, range 0-20-40-60 in lbs/in². Supplied with oil pressure sender
Required: 1
BT2200/01. Black dial with white illumination and clear glass, black bezel, range: 30-70-110 °C - reconditioned, in exchange
2.4, 3.4 and 3.8
Required: 1
BT2200/06 - exchange item. Black dial with white illumination and clear glass, black bezel, range: 30-70-110°C
240 and 340
Required: 1
BT2200/01 - new item. Black dial with white illumination and clear glass, black bezel, range: 30-70-110°C
Required: 1
RV7403/01 - exchange. Clock not inclusive
Required: 1
RV7403/00 - exchange. Clock not inclusive
Required: 1
CE1111/01, works with either positive and negative earth - reconditioned, in exchange
Required: 1
SN6317/00 model with 127 mm diameter, black surface and black bezel. Range: 0-120 MP/H, turns: 1248 - reconditioned in exchange
Required: 1
SN6317/02 model with 127 mm diameter, black surface and black bezel. Range: 0-120 MP/H, turns: 1408 - reconditioned in exchange
Required: 1
SN6317/04 model with 127 mm diameter, black surface and black bezel. Range: 0-120 MP/H, turns: 1312 - reconditioned in exchange
Required: 1
SN6317/06 model with 127 mm diameter, black surface and black bezel. Range: 0-140 MP/H, turns: 1100 - reconditioned in exchange
Manual. 3.54:1 final drive
Required: 1
SN6317/08 model with 127 mm diameter, black surface and black bezel. Range: 0-140 MP/H, turns: 1152 - reconditioned in exchange
Required: 1
SN6317/09 model with 127 mm diameter, black surface and black bezel. Range: 0-240 KP/H, turns: 815 - reconditioned in exchange
Required: 1
SN6317/10 model with 127 mm diameter, black surface and black bezel. Range: 0-140 MP/H, turns: 1100 - reconditioned in exchange
Required: 1
SN6317/12 model with 127 mm diameter, black surface and black bezel. Range: 0-240 KP/H, turns: 780 - reconditioned in exchange
Required: 1
SN6317/14 model with 127 mm diameter, black surface and black bezel. Range: 0-240 KP/H - reconditioned in exchange
Required: 1
SN6317/25 model with 127 mm diameter, black surface and black bezel. Range: 0-240 KP/H, turns: 720 - reconditioned in exchange
Required: 1
SN6317/27 model with 127 mm diameter, black surface and black bezel. Range: 0-240 KP/H, turns: 680 - reconditioned in exchange
Required: 1
SN6317/29 model with 127 mm diameter, black surface and black bezel. Range: 0-240 KP/H, turns: 720 - reconditioned in exchange
Required: 1
SN6317/30 model with 127 mm diameter, black surface and black bezel. Range: 0-240 KP/H, turns: 720 - reconditioned in exchange
Required: 1
for negative earth cars, serial number: BR1310/00. Fitted to back side of speedometer
Required: 1
12 volt, 2.2 watt, E10/13 screw base, clear bulb surface - instrument panel and interior lamp
Required: 6
for toggle switches, plastic, black - set of 6 pieces
Required: 1
four position switch for side and headlamps plus fog lamps
Required: 1
Required: 1
without barrel and keys. Comes with modern bezel, re-use existing
Required: 1
with knob - variant with push on terminals
Required: 1
choke lever
2.4
Not quite as original but period style
Required: 1
choke warning lamp sitch to bracket
Early 2.4 only
Quote chassis no.
Required: 1
12 volt, 2.2 watt, E10/13 screw base, clear bulb surface - instrument panel and interior lamp
2.4 only
Required: 1
2.4 R/H drive only
Required: 1
Manual electric choke
not 2.4
Originally used for some overseas markets but instead of the often troublesome otter switch. Very period
Required: 1
12 volt, 2.2 watt, E10/13 screw base, clear bulb surface - instrument panel and interior lamp
Required: 1
in red with chrome bezel - diameter: 7/8". Handbrake, hazard warning, choke and heated rear window
Required: 1
12 volt, 2.2 watt, E10/13 screw base, clear bulb surface - instrument panel and interior lamp
Required: 1
for warning lamp - hand brake and brake fluid level
Required: 1
for warning lamp - hand brake and brake fluid level
Required: 1
indicator and headlamp flash
Mark II (1959-60) - 3.4 to 151465 and 175682, 3.8 to 201086 and 212639, 2.4 to 102241 and 125519
Required: 1
indicator and headlamp flash
Mark II (1960-69) - 3.4 from 151466 and 175683, 3.8 from 201087 and 212640, 2.4 from 102242 and 125520 plus all 240 and 340 models
Required: 1
steering column, upper half
May need modification in some applications and some reusing from existing part
Required: 1
for lower switch assembly???
Note: May need modification in some applications.
Required: 1
12 volt, 2.0 watt, BA7S bajonet base, clear bulb surface - for Overdrive indicator ???
Required: 1
horn ring in black - comes with badge
Mark II (1959-64): 3.4 to chassis no. 164123 and 179463, 3.8 to chassis no. 231289 and 223055
Required: 1
horn ring in black - comes less badge
Mark II (1964-69): 3.4 from chassis no. 164402 and 179499, 3.8 from chassis no. 231586 and 223125 plus all 240 and 340 models
Required: 1
in Horn push???
Required: 1
for horn slip ring contacts
Required: 1
6RA type with 4 Lucar terminals - overdrive, starter motor, ignition, horn, alternator and heater motor
Required: 1
6RA type with 4 Lucar terminals - overdrive, starter motor, ignition, horn, alternator and heater motor
Required: 1
26RA type, 4 Lucar terminals, angular hosing - horn
repro
Required: 1
overdrive operating - 90SA type
Quote Chassis no.
Required: 1
assembly
Lens with holder. May used with 287383 to achieve a more original appearance. Some rewiring is required
Required: 1
12 volt, 2.2 watt, E10/13 screw base, clear bulb surface - instrument panel and interior lamp
Required: 6
12 volt, 2.2 watt, E10/13 screw base, clear bulb surface - warning lamp
Required: 1
headlamps - round FS22/1 type with screw-in terminals
All 2.4/3.4/3.8. Early 240/340.
Quote chassis no.
Required: 1
headlamps - square 103SA type with lucar terminals
Later 240/340
Quote chassis no.
Required: 1
on headlamp dip switch
All 2.4/3.4/3.8. Early 240/340.
Quote chassis no.
Required: 1
on headlamp dip switch
Later 240/340
Quote chassis no.
Required: 1
12 volt, 2.0 watt, BA7S bajonet base, clear bulb surface - instrument and switch illumination ???
Required: 3
variant with chromed cover. Size socket 124 x 34 mm, height 20 mm
Required: 2
12 volt, 5 watt, BA9s bajonett base, clear bulb surface - side lamp, number plate lamp
Required: 2
12 volt, 5 watt, BA9s bajonett base, clear bulb surface - side lamp, number plate lamp
Required: 1
12 volt, 5 watt, BA9s bajonett base, clear bulb surface - boot lamp
Required: 1
with 78" length for RHD models
Mark II with 4-speed 'Moss Box' gearbox (1959-65)
R/H drive Moss gearbox
Required: 1
with 68" length for RHD models
Mark II with all synchromesh gearbox (1965-69)
Required: 1
with 96" length for LHD models
Mark II with 4-speed 'Moss Box' gearbox (1959-65)
Required: 1
with 106" length for LHD models
Mark II with all synchromesh gearbox (1965-69)
Required: 1
with 76" length for RHD models
Mark II with DG250 automatic transmission (1959-65)
Required: 1
with 60" length for LHD models
Mark II with DG250 automatic transmission (1959-65)
Required: 1
with 66" length
RHD non overdrive models
Required: 1
12 volt, for positive and negative earthed cars without cut-off relay, complete with fitting instructions
Includes switch, flasher unit and mounting bracket. If flasher unit only is required discard other parts.
Required: 1
conversion kit with the best custom-made and most efficient parts available, ready to bolt on
Fitted under dash
Required: 1
