Radiator, water pump and fan belt MKII
novo com rede em cobre de alto rendimento
Necessário: 1
exchange item with standard copper core
2.4, 3.4 and 3.8 (1959-67): models with manual transmission and with DG250 automatic transmission
Necessário: 1
exchange item with high efficiency core
3.4, 3.8, 240 and 340 with BW35 automatic transmission (1967-69)
Necessário: 1
exchange item with high efficiency core
240 and 340 models with manual transmission (1967-69)
Necessário: 1
radiator - pressure: 4 PSI, 3/4" depth
4 lbs caps are fitted to most models. We can supply either 4 lbs or 7 lbs. In some circumstances it may be appropiate to fit a 13 lbs cap
Necessário: 1
radiator - pressure: 7 PSI, 3/4" depth
4 lbs caps are fitted to most models. We can supply either 4 lbs or 7 lbs. In some circumstances it may be appropiate to fit a 13 lbs cap
Necessário: 1
radiator - pressure: 13 PSI, 3/4" depth
4 lbs caps are fitted to most models. We can supply either 4 lbs or 7 lbs. In some circumstances it may be appropiate to fit a 13 lbs cap
Necessário: 1
radiator - brass type with 9/16" BSP thread
Necessário: 1
radiator - fibreglass replacement
Necessário: 1
Kevlar reinforced
Mark II 2.4 (1959-63) - LHD models to chassis no. 127125 and RHD models to chassis no. 115182
Necessário: 1
Kevlar reinforced
Mark II 2.4 (1963-67) - LHD models from chassis no. 127126 RHD models from chassis no. 115183
Necessário: 1
Kevlar reinforced
Mark II 240 (1967-69)
Necessário: 1
Kevlar reinforced
Mark II 3.4 and 3.8 (1959-67)
Necessário: 1
Kevlar reinforced
Mark II 340 (1967-69)
Necessário: 1
top - manifold to radiator
2.4 from 115183 (RHD) and 127126 (LHD), all 3.4 and 3.8 models (1959-67)
Necessário: 1
top
340
reinforced
Necessário: 1
bottom - radiator to water pump
3.4, 3.8 and 340 (1959-69)
Necessário: 1
bottom
Mark II 2.4 and 240 (1959-69)
Necessário: 1
lightweight alloy reproduction
Necessário: 1
water pump - please note: The shaft is supplied with excess length and must be shortened accordingly, depending on the vehicle
Necessário: 1
for special screw lockating pump spindel
Necessário: 1
with brass body - water pump spindle
Necessário: 1
fixing pulley and fan to carrier
Necessário: 4
13 x 925 mm
Single Belt 2.4. Early models. Quote engine no.
Necessário: 1
16 x 930 mm - duplex type
Mark II 2.4 from enginre no. BH5365 and all 240 models
Necessário: 1
Single belt 3.4/3.8. Early models. Quote engine no.
Necessário: 1
for "v" type fan belt
Mark II 3.4 to engine no. KH4022 and 3.8 to engine no. LC1671 (1959-63)
Necessário: 1
for "w" type (duplex) fan belt
Mark II 3.4 from engine no. KH4023, 3.8 from engine no. LC1672 and 340 from engine no. 7J50001 (1963-69)
Necessário: 1
Exept 202372. Use 1 Only and 1 x 208950
Necessário: 2
water pump - characteristic: notch for 13 mm wide fan belt
Early type with single belt
Necessário: 1
12 blade sheet metal type, diameter: 410 mm
Necessário: 1
11 blade competition plasctic type, diameter: 410 mm
Necessário: 1
for pump
3 if fitted with dynamo link
Necessário: 4
tailor made kit with brackets, temperature contoler with loom, hoseclamps and fitting material. For negative earthed cars only! This 15.2" high power blowing fan must be fitted in front of the radiator
Necessário: 1
tailor made kit with brackets, temperature contoler with loom, hoseclamps and fitting material. For positive earthed cars only! This 15.2" high power blowing fan must be fitted in front of the radiator
Necessário: 1
