Sunbeam Alpine spare parts at SC Parts

The engineers Kenneth Howes and Jeff Crompton were commissioned in 1956 to develop a sporty vehicle primarily aimed at the US market. The result was the Sunbeam Alpine, a British roadster produced from 1959 to 1968 in five generations (Series I to V), with a total of 69,278 units built. Each series brought technical and stylistic advancements.

Series I (1959–1960): Distinctive tailfins and a 1,494 cc engine with two Zenith Stromberg carburetors.
Series II (1960–1963): Improved performance thanks to a larger 1,592 cc engine.
Series III (1963–1964): In addition to the roadster called Alpine Tourer, there was a version with a fixed hardtop, designated Alpine GT. The Series II design was largely retained.
Series IV (1964–1965): Smaller tailfins and a more modern design. For the first time, a model with a fully synchronized gearbox was optionally available.
Series V (1965–1968): Largest engine with 1,725 cc and 92 hp, sportier appearance with cleaner lines and no tailfins.

Our recommendation for your Sunbeam Alpine

Starter motor

new item - M35G inertia drive SB type - rotation: clock wise, voltage: 12V, drive: 9 teeth. Serial no.'s: 25022, 25079
Part no. 372159

Brake pads

front. Identify by 1/4" retaining pins
Part no. 7391

Brake shoes

rear. Identified by Girling brake system with 9" brake drum
Part no. 15919

Weber Carburettor

32/36 DGV type. Contents inlet manifold, air filter, linkage. Variant with manual choke
Part no. 556010

Limora engine oil

SAE 20W-50 Classic
Part no. 511114

Wire wheel

chromed, fitment: 42 mm, rim size: 4.0J x 13", number of spokes: 60, rim inset: 17.50 mm, wheel weight: 6.25 kg, maximum wheel load: 311 kg
Part no. 2075