1 |
289086 |
Brake master cylinder
0,70" bore size
1275GT (not UK) with 10" wheels, Innocenti Cooper 1300
Identification: round plastic reservoir
|
2 |
558 |
Filler cap
for master brake cylinder 289086
|
3 |
304526 |
Seal kit brake master cylinder
for master brake cylinder 289088, 0.70" bore size
|
4 |
214936 |
Brake master cylinder
0.70" and 0.75" stepped bore size, with senor in filler cap, metric fittings M10 + M12, yellow band
848/998 cc 10/1978 on (Europe 1980 on)
replaces 1978 to 1985 types (pre yellow band) with imperial fittings, for this cars adapter pipes 306305 for RHD, 306306 for LHD are necessary
|
5 |
306306 |
Brake pipe set
for conversion to master brake cylinder 214936
LHD
if master brake cylinder with 2 equal fittings M10 would be replaced by cylinder 214936 with unequal fittings M10 + M12
|
5 |
306305 |
Brake pipe set
for conversion to master brake cylinder 214936
RHD
if master brake cylinder with 2 equal fittings M10 would be replaced by cylinder 214936 with unequal fittings M10 + M12
|
6 |
305749 |
Seal kit brake master cylinder
for genuine master brake cylinder GMC173/198/192/195. 0.70" bore size
upto 1985
Identification: equal fittings M10, black indentification band
|
6 |
306303 |
Seal kit brake master cylinder
for master brake cylinder 214936, 0.70" and 0.75" stepped bore size
1985 on, earlier when fitted
Identification: unequal fittings M10 + M12, yellow indentification band
|
7 |
306302 |
Filler cap
for genuine master brake cylinder GMC173/198
if switch for brake pressure faillure on master cylinder body
|
8 |
306304 |
Filler cap
with sensor, for genuine master brake cylinder GMC192/195 and master cylinder 214936
if no switch for brake pressure faillure on master cylinder body
|
9 |
201288 |
Switch
brake pressure failure, for genuine master brake cylinder GMC173/198
on body master brake cylinder
|
10 |
2303 |
Nut
retaining master cylinder to body
|
11 |
212194 |
Spring washer
retaining master cylinder to body
|
12 |
306307 |
Gasket
under master brake cylinder, to body
|
13 |
279041 |
Push rod
for genuine master brake cylinder GMC173/192/186/198
|
14 |
9664 |
Clevis pin
push rod brake master cylinder to pedal
|
15 |
212193 |
Plain washer
for clevis pin
|
16 |
7465 |
Split pin
for clevis pin
|
17 |
348052 |
Brake pedal
LHD
post 1976, (V)124424 on
|
17 |
306441 |
Brake pedal
RHD
post 1976, (V)124424 on
|
18 |
8636 |
Bush
for brake pedal
also used on clutch pedal
|
19 |
305893 |
Pedal shaft
simultaneous for clutch pedal
|
20 |
7455 |
Nyloc nut
for pedal shaft
|
21 |
326449 |
Spring
for brake pedal
not automatic cars
|
22 |
13933 |
Pedal rubber
1976 (V)124423 on, up to (V) BD498952
could alternative be used on later cars
|
22 |
305894 |
Pedal rubber
(V) BD498953 on
alternative 13933 could be used
|
23 |
215398 |
Pressure regulating valve
for rear brake, fitted on rear subframe
all Cooper S
|
23 |
306460 |
Pressure regulating valve
for rear brake, fitted on rear subframe
848/998 cc
|
24 |
304601 |
Seal kit
for pressure regulating valve
|
25 |
7884 |
Screw
retaining valve to rear subframe
|
26 |
212192 |
Spring washer
retaining valve to rear subframe
|
27 |
289089 |
Pressure regulating valve
for rear brake, fitted on bulkhead
1978 on
|
28 |
3780 |
Bolt
retaining valve to bulkhead
|
29 |
212192 |
Spring washer
retaining valve to bulkhead
|
0 |
2395 |
Brake light switch
mechanical, fitted to pedal box
|
0 |
3201 |
Nut
retaining brake light switch
|
Zoom
